BTPS Hydraulic Directional Control Solenoid valve 4WE series 4WE6 4WE6D 4WE6D62/EG24N9K4 R900561274 hydraulic valve

Factory sale Rexroth Valves 4WE6A 4WE6B 4WE6C 4WE6D 4WE6E 4WE6F 4WE6J 4WE6H 4WE6G 4WE6L 4WE6M 4WE6 4WE10 Hydraulic Valve

A hydraulic valve is an automation component operated by pressure oil. It is controlled by a pressure distribution valve and
pressure oil. It is usually used in combination with an electromagnetic pressure distribution valve. It can be used to remotely
control the on and off of the oil, gas, and water pipeline systems of hydropower stations. Commonly used for clamping, control,lubriion and other oil circuits. There are direct-acting type and pilot type, and the pilot type is mostly used.

Hydraulic valve design principle

The design of the hydraulic valve is mainly for the design of the hydraulic valve group, and the oil circuit must be considered before the design of the hydraulic valve group. It is necessary to determine in advance which parts of the oil circuit can be integrated. The design of the oil circuit must be simple and save Go unnecessary steps. After determining the oil circuit, the main thing is the oblique hole and the process hole. These things in the oil path should be reduced. As long as it is enough, it
is not necessary too much. Pay attention to the hole diameter in the design of the oblique hole and the process hole.

Collecting valve	Proportional valve	Maintaining valve
Throttle valve	Relief valve	Solenoid directional valve
Speed regulation valve	Pressure reducing valve	Manual reversing valve
Drive valve	Pressure valve	Check valve
Flow valve	Cartridge valve	Hydraulic control one-way valve
Collecting valve	Stop valve	Solenoid valve
Pilot valve	Reverse check valve	Superposition valve
Direct acting relief valve	Pilot check valve	Directional valve
Pilot relief valve	Sequence valve	Pilot sequence valve
Pilot reducing valve	Balance valve	Direct acting sequence valve

Features

▶ High-power solenoid

▶ Porting pattern according to DIN 24340 form A

▶ Porting pattern according to ISO 4401-03-02-0-05 andNFPA T3.5.1 R2-2002 D03

▶ Wet-pin DC or AC solenoids with detachable coil

▶ Solenoid coil can be rotated by 90°

▶ The coil can be changed without having to open thepressure-tight chamber

▶ Electrical connection as individual or central connection

▶ Manual override, optional

▶ Spool position monitoring, optional

High Performance Replacement Reexroth Hydraulic Pump Solenoid valve Directional Control Valve 4WE6062-EG24N9K4

The Hydraulic Solenoid Operated Selector Valves come in both 12VDC and 24VDC. These valves come with a nominal flow of either

50LPM or 90LPM and have a maximum pressure of 315 bar.

---- Stack up to 3 sections (A,B type)
----12V/24V DC optional
----3-pin or 2-pin water-proof plug optional

A hydraulic valve is an automation component operated by pressure oil. It is controlled by a pressure distribution valve and pressure oil. It is usually used in combination with an electromagnetic pressure distribution valve. It can be used to remotely control the on and off of the oil, gas, and water pipeline

systems of hydropower stations. Commonly used for clamping, control,lubrication and other oil circuits.

There are direct-acting type and pilot type, and the pilot type is mostly used.

The design of the hydraulic valve is mainly for the design of the hydraulic valve group, and the oil circuit must be considered before the design of the hydraulic valve group. It is necessary to determine in advance which parts of the oil circuit can be integrated. The design of the oil circuit must be simple and save Go unnecessary steps. After determining the oil circuit, the main thing is the oblique hole and the process hole. These things in the oil path should be reduced. As long as it is enough, it is not necessary too much. Pay attention to the hole diameter in the design of the oblique hole and the process hole.

BTPS Hydraulic Technology Co., Ltd. was established in September 2010. It is a national high-tech enterprise whose main business is hydraulic piston pumps, hydraulic motors, hydraulic original parts and other accessories.

After years of development and training, the company has established a unique manufacturing system with a complete set of plunger pump and motor manufacturing processes and equipment from precision casting, precision forging, precision machining, heat treatment, bimetal sintering, assembly to testing. And passed ISO9001 quality system certification.

The company has a high-tech enterprise R&D center and has successively undertaken a number of government key new product projects and major scientific and technological achievement transformation projects. At the same time, many of the company's products have won industry technological progress awards. It has been selected as an outstanding enterprise in Guangdong many times.

The company adheres to the business philosophy of "high quality, variety, and excellent service". It has more than 30 domestic and foreign dealers and has established a complete dealer sales and service system. Covering more than 20 provinces/municipalities/autonomous regions across the country and extending to the global mining machinery and construction machinery market.

So far, we have become one of the leading companies in the domestic hydraulic aftermarket, occupying a leading position in the hydraulic piston pump and hydraulic motor aftermarket, and have repeatedly received high praise from the market and customers from around the world.

BTPS is committed to becoming a leader in the hydraulic transmission industry and providing high-quality hydraulic products and hydraulic transmission solutions to customers around the world.